This fighting mad yellow jacket mascot figurine is ready for battle with any and all comers. Just for extra measure he is also sporting spiked battle gloves. For more info about this mascot please see my Etsy shop.
Viking Mascot Statue ... Desktop Size
This battle hardened war ready Viking mascot statue is actually a relief sculpted on a 90 degree angle. Dimensions are 8" high x 5.5" wide x 3" deep. Can also be used as a Warrior, Marauder, and Gladiator mascot statue. For more information please see my Etsy Shop.
Customized Viking Head Mascot Statue
This is a recent customized slightly larger than life viking head that I originally sculpted with no base and with a horned helmet. The patina is a cold Tiffany Green application. You can find more information about this mascot head by visiting my Etsy shop.
Monumental Bulldog Mascot Statue Wrapping Up
This is a short walk around video showing this gigantic bulldog mascot. A little more buffing, polishing, and sealing and this beast will be ready to go to its new home to begin its watch!
Australian Rugby League Bulldog Mascot
A recent addition to a Rugby League in Queensland, Australia. This "Bruiser" life size bulldog will eventually be mounted inside the clubhouse where a larger than life bulldog head ("Meat Head"bottom photo) will also be wall mounted.
Top Dawg of the House II
Recent installation at Evans Middle School in Ottumwa, Iowa
Close up view of the ready to ship bulldog. This model has had a lettered sweater added.
Giant Bulldog Model Sculpting
No Trespassin' ... English Bulldog Mascot
The most recent life size English Bulldog mascot statue. Overall dimensions: 14.5" high x 14.5" wide x 23" long.
Large Stylized Horse Head Mascot
Recently completed foam carving covered with synthetic stucco making a very durable statue for outdoor placement. Overall size is 43.5" long x 36.5" high x 12" wide. Weight is approx. 40 lbs.
This one of a kind mascot statue can be utilized as a mustang, bronco, or stallion mascot statue and can be painted any color over the finished white.
For more info about this piece you can check out my Etsy shop and SnarlingCrow Studios shop online.
Functional Full Size Gladiator Helmet
This is a full size helmet that covers the entire upper half of your head. Totally hand-fabricated to fit head sizes up to 23.5"-24" in circumference (measured just above the brow line and all the way around the head). The back of the helmet has attached cloth strips that have been cut and painted in a woodland pattern to help break up your silhouette which is always helpful when hiding from the enemy while setting up a well planned ambush. Rugged fiberglass construction makes this a durable helmet that is designed to be worn whenever your inner gladiator spirit needs to emerge or to simply help you finish off your gladiator, spartan, viking, warrior, or marauder costume! Also could be used as a great mascot helmet!This is a functional helmet but it's not a toy for children nor would I recommend driving with it while on your head. Other than that only your imagination is limiting you to how you could use it.
This is the same helmet but under different lighting which causes a color shift to emerge.For more info about this helmet please see my Etsy shop.
Fort Sill, Oklahoma Mascot ... English Bulldog Body Type
This large bulldog mascot was commissioned by Bravo Battery, 3-6 ADA Battalion at Fort Sill, Oklahoma.
Overall size: 28" high x 24" wide x 39" long
Growling Panther Mascot
One of my most recent mascot creations is this panther wall mounted mascot. These mascots are all created as one-of-a-kind sculptures which the heads can also be used as a representation of a mountain lion, cougar, and puma.
For more ordering information please visit my Etsy shop.
Top Dawg of the House
Friendly faces are my specialty!
One of the latest commissions that I've just finished is this large American Bulldog mascot for Jarvis Christian College in Texas.
Overall size is 37.5" high X 24" wide X 48.5" long.
Overall size is 37.5" high X 24" wide X 48.5" long.
Large American Bulldog Mascot Underway
Because I normally only show my finished mascots I'm often asked how I get my mascot sculptures to their final finish. So, in response to this often asked question, I'm showing during this and the last posting, the mascots while they are going thru their foam sculpting phase where I'll block out their basic anatomy while trying to get the pose that I'm looking for. Most of the time, I'll end up adding and subtracting foam many times until I'm ready to go to the next fabrication phase. Pictured above the rough-in phase with the chainsaw and files are almost complete on the model. This is a fairly large sculpture with the overall length at approximately four feet. Once I get what I want the clay will be applied as I prepare for the final sculpting/fabrication.
Here is the face after refining the clay sculpt. The collar has been beefed up and detailed. Now to the rest of the body.
Final Detail Foam Carving On Gigantic Bulldog Mascot
The Dawg has come out of his house for awhile. I built this building a few feet away from my main shop a few months ago especially with large mascot fabricating in mind. It allows me to enjoy the nice sunny days and when it gets rainy or cold I just go inside and walk around on platforms. I'd much rather be out in the open with the sunshine though!
What a beautiful and kind face!
Making a few detail cuts with an electric chainsaw.
Doing the same detailing again. Just in case you might be wondering what's that thing protruding from the dog collar under the jaw ... it's a small crowbar that I use to attach to the stainless steel armature tubing that comes out there so that I can wheel the dawg in and out of his temporary house.
I'm doing a little filing with a stainless steel microplane cutter. This model has already been scanned and CNC'd to give me the primary form from which I'll work from as the fabrication/sculpting/detailing phases progress.
Subscribe to:
Posts (Atom)
